How to Keep Your GatorTape Happy
A well-cared-for GatorTape is a happy one — and a happy GatorTape will stick by your side for the long haul.
Look after it, and it’ll measure up for years to come.
Follow these tips so your GatorTape doesn’t get... Snappy
Don’t Drag the Blade
Keep your finger off the locking mechanism when extending or retracting.
Why? Drag causes early wear to the print.
Tip - Use the unlock button for a smooth glide every time.
Clean the Blade (Often!)
Wipe the blade clean frequently when working with grit or glue.
Why? Grit can scratch the lacquer and damage the rewind action.
Tip - Use mineral spirits or alcohol only to remove tar or glue.
Water? Big No-No
Dry the blade after working in wet environments.
Why? Moisture can rust the spring motor inside the case.
Tip - Avoid solvents that melt or damage the protective coating.
Slow Your Roll
Don’t let the blade snap back uncontrolled.
Why? It can damage the blade, crack the case, or hurt your hand.
Tip - Guide it back gently using your other hand.
That Hook? It MOVES
Let the Tru-Zero hook
slide freely.
Why? It’s designed to shift for accurate inside and outside measurements.
Tip - Don’t clinch the rivets - that’ll throw off your results.
Sharp Edges = Trouble
Watch for corners and avoid stepping
on the blade.
Why? Kinks or twists can lead to permanent damage.
Tip - Treat your tape like the precision tool it is.
Unhook Before You Yank
Always check if the magnetic hook is caught before pulling.
Why? Yanking can bend the hook or tear the blade.
Tip - Gently dislodge it if it’s stuck.
Store It Smart
Keep your tape in a clean, dry toolbox — not loose in the back of a van.
Why? Tossing it around increases the risk of dents, dust, and damage.
Tip - Use the belt clip when on the go, and store it somewhere safe after use.
It’s Not a Real Gator
Please don’t wrestle it, feed it, or expect it to bite intruders.
Why? It’s fierce, but only when it comes to measuring.
Tip - Leave the wrestling to the professionals — this one’s for precision, not predators.
Every product solves a real problem - on-site or at home.
Heavy-duty gear.
No compromises.
Tools that deliver accuracy where it matters most.
Used daily by shutter fitters, carpenters & kitchen installers.